Film to PhotosPlustek OpticFilm Mac driver for Sequoia, Tahoe and macOS 27
Looking for a Plustek OpticFilm 7400, 8100 or 8200i driver for macOS Sequoia, Tahoe or macOS 27? Why you may not find one, why you usually don't need one, and which software works without it.
You usually don't need a Plustek driver to use an OpticFilm scanner on macOS Sequoia, Tahoe or macOS 27: software that talks to the scanner itself over USB, such as Film to Photos or VueScan, works without one. That's handy, because at the time of writing Plustek's OS compatibility page points Mac users of several OpticFilm models to a SilverFast upgrade rather than a Plustek driver, and older Mac drivers are often Intel-only.
Which macOS versions work
Film to Photos runs on macOS 11 Big Sur and later, on Apple Silicon and Intel Macs, with no driver to install.
| macOS | Film to Photos | Needs a Plustek driver? |
|---|---|---|
| macOS 27 | Yes, tested (Apple Silicon) | No |
| macOS 26 Tahoe | Yes | No |
| macOS 15 Sequoia | Yes | No |
| macOS 14 Sonoma | Yes | No |
| macOS 13 Ventura, 12 Monterey, 11 Big Sur | Yes | No |
| macOS 10.15 Catalina or older | No | — |
We test on macOS 27; the other versions are supported but not tested on every release.
Which scanners work without a driver
| Scanner | With Film to Photos |
|---|---|
| OpticFilm 7400 | Tested, works |
| 7200, 7200i, 7300, 7500i, 7600i | Should work (beta) |
| 8100, 8200i | Should work (beta); one newer 8200i revision not yet |
| 8300i, 135i | Not yet (import their scans instead) |
"Beta" means the model uses the same open-source scanner support (from the SANE project) as the 7400 but we haven't tested it on real hardware yet. Try the free trial with yours before buying.
Why there's often no Mac driver
- Old models, old software: scanner makers rarely update drivers for older models, and some Mac drivers were written for Intel Macs only.
- Apple Silicon and Rosetta: Intel-only drivers and apps run through Apple's Rosetta translation, which loses full support after macOS 27. See will my scanner software stop working?
- Image Capture won't see it: the built-in Image Capture app only works with scanners that have a macOS driver, so most OpticFilm models don't show up there.
What to do instead of hunting for a driver
- Plug the scanner straight into the Mac with its USB cable and switch it on.
- Install software that doesn't need a driver: Film to Photos for color negatives, or VueScan if you need slides or many scanner brands. See the software compared.
- Press Scan. If the scanner isn't found, work through Plustek scanner not detected on a Mac.
New to the scanner? Follow how to set up a Plustek OpticFilm on a Mac.
Quick answers
Is there a Plustek OpticFilm 8200i driver for macOS Sequoia?
You don't need one with software that runs the scanner itself. Film to Photos (8200i in beta) and VueScan talk to the scanner over USB without a Plustek driver. One newer 8200i hardware revision isn't supported by Film to Photos yet.
Do I need a Plustek driver on a Mac?
Not with Film to Photos or VueScan, which include their own scanner support. Plustek's own utilities and older SilverFast versions may need one.
Does a Plustek OpticFilm work on macOS Tahoe and macOS 27?
Yes, with software that supports it. Film to Photos runs on macOS 11 and later and is tested with the OpticFilm 7400 on an Apple Silicon Mac running macOS 27.
Where do I download the Plustek driver for Mac?
Plustek's support website lists software per model. At the time of writing (November 2026), its OS compatibility page points Mac users of several OpticFilm models to a SilverFast upgrade rather than a Plustek Mac driver. If there's no Mac driver for your model, use software that doesn't need one.
Will an old Plustek Mac driver work on an Apple Silicon Mac?
Sometimes, through Apple's Rosetta translation, but Intel-only drivers and apps are a risk: Apple has said macOS 27 is the last version with full Rosetta support.